Pettibone T1258X

Double tap to zoom

 

Features

Horizontal Traversing Boom
The Traverse provides up to 70 inches of horizontal boom transfer, the industry's only new machine with this capability. With Traverse, the specified lift height is the same as the landing height. This stands in contrast to a traditional fixed boom pivot, where the true landing height is generally several feet less than the advertised lift height, as operators must account for withdrawing the forks out of the load with enough rearward travel for the fork tips to clear the landing zone.

 

Engine
Powered by a 117-horsepower Cummins QSF3.8 Tier 4 Final diesel engine with DEF and SCR aftertreatment. Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance.

 

Drivetrain & Axles
Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed.

  • Dana 223 Series high steer axles provide excellent tractive effort.
  • Tight steer angle capability provides efficient turning radius.
  • Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse.
  • Full time 4-wheel-drive with limited-slip front axle differential.

 

Boom Construction
The 4-section boom features formed boom plates that offer greater strength with less weight.

  • Boom deflection minimized for better control and accuracy placing loads.
  • Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads.
  • Fastener-less wear pads simplify service.
  • Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components.
  • Compression tilt design allows for a smaller bore cylinder with same tilt force.
  • Heavy-duty extension chains help ensure stable boom functions and longevity.

 

Capacity & Reach
The T1258X has a capable 12,000-pound load capacity rating. It achieves forward reach up to 47 feet, 10 inches and a maximum lift height of 58 feet, 6 inches.

 

Outriggers

Axle-mounted outriggers come standard on the T1258X.

  • Machine chassis will sway independent of the outrigger system.
  • Outriggers positioned to provide clear visibility out to the fork tips.

 

Hydraulics
The Traverse's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds.

  • Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills.
  • Single lift cylinder provides operator with clear sight lines.
  • Twin lines for tilt and auxiliary plumbing.

 

Steel Tanks
Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load.

 

Operator Station
The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown.

  • New analog/LCD gauge cluster.
  • Enhanced climate control system.
  • Split door design allows upper half to lock in the open position.
  • Flat, bolt-in glass can easily be removed or replaced.
  • Openable rear window improves air flow while keeping cab dry.
  • Lockable storage area under seat for manual, gloves and tools.

 

Electrical

  • Split-system electrical panels allow for easier service of individual circuits.
  • Heavy-duty bright LED lighting
  • Weather-sealed connections
  • USB accessory plug in cab
  • 12-volt accessory plug in engine bay

 

Service

  • Easy access to all filters and fluid level indicators.
  • Lockable fuel-fill in clean, accessible location.
  • Inside of boom easily accessible for service.
  • Non-tensioned boom hoses offer long service life.

Specifications

DIMENSIONS
Overall Height 9' (274 cm) boom down
Fork Carriage 48" (122 cm) standard
Ground Clearance 19" (48 cm)
Overall Length 22' 11" (699 cm) to fork frame
Overall Width 8' 6" (259 cm)
Pallet Forks 2.25 x 4 x 48" standard
Approximate Operating Weight 32,500 lbs (14,742 kg) with outriggers
ENGINE
Model/Power 117 HP (87 kW) Cummins QSF3.8 Tier 4 turbo diesel with DEF and SCR aftertreatment
DEF Tank 5 gal. (19 L)
Fuel Tank 30 gal. (114 L)
HYDRAULICS
System Pressure comp, axial piston pump
Features Fully proportional functions
Auxiliary boom tip hydraulics
Quick disconnect for attachments
Controls Single joystick, pilot operated
PERFORMANCE
Max Load Capacity 12,000 lbs (5,443 kg)
Maximum Lift Height 58' 6" (1,783 cm)
Landing Height 58' 6" (1,783 cm)
Maximum Forward Reach 47' 10" (1,458 cm) at 24" LC
42' (1,280 cm) non-traversed
Below Grade Reach 3' 2" (97 cm)
Maximum Travel Speed 15.2 mph (24.5 km/h)
Turning Radius 14' 4" (437 cm)
Drawbar Pull (GVW) 31,800 lbs (14,424 kg)
Frame 24° of leveling (12° right and left)
Rear axle stabilization system
Transmission Dana VDT12000 Series, 3-speed Powershift, forward & reverse
Axles Dana 223 Series: 4-wheel drive, 45% limited slip front differential
Steering 4 wheel, 2 wheel, and crab steer
Brakes Oil-immersed inboard disc service brakes, integral front SAHR park brake
Tires 14.00 x 24, 16 ply, G2 tread air-fill standard
Boom 4-section, slide pad
Automatic fork leveling without slave cylinder