Double tap to zoom



Efficient Feed Movement

The raised lower right auger configuration, along with the close tolerance between the auger flighting and the auger troughs, results in a fast and complete cleanout. The offset upper right auger in combination with the raised lower auger requires less horsepower and provides a faster mix time.

Consistent Discharge

The close auger tolerances and raised lower auger design provide a fast, consistent discharge from beginning to the end of unloading. This results in even feed placement across the entire length of the bunk without a delay for mixer control. The three-auger discharge allows adjustment for feeding into higher bunks. It has a simple, hydraulic drive that provides sooth, even discharge and the augers are easy to remove for fast service.

Swivel Discharge

The versatile swivel discharge will discharge to the left, right or rear of the Primor, allowing use in difficult-to-access areas. Controlled from the tractor, bedding can be blown up to 42’ through a full 300° range.

Simplified Drive

As with the main auger drive, the discharge auger shafts are splined for a more positive power transfer and longer service life. The simplified drive design, featuring only two chains and a remote grease bank, results in easy service and maintenance.


Specifications 4136
Capacity - no extensions (m3) 10.2
Capacity - no extensions (cu.ft) 360
Number of augers 4
Overall height - no extensions (cm) 249
Overall height - no extensions (in) 98
Overall width - without options (cm) 229
Overall width - without options (in) 90
Tread width (cm) 221
Tread width (in) 87
Weight (kg) 4264
Weight (lb) 9400
Drive Planetary
PTO speed (rpm) 540 / 1000
Minimum power requirement for PTO (kW) 45
Minimum power requirement for PTO (hp) 60
Maximum load (kg) 4899
Maximum load (lb) 10800
Door opening (h x w, cm) 80 x 82
Door opening (h x w, in) 31.5 x 32.25
Auger diameter - lower (cm) 61
Auger diameter - lower (in) 24
Auger diameter - upper (cm) 61