Kuhn EL 82-180

Double tap to zoom

 

Features

Rotor Drive

On the larger EL models the rotor is driven by case hardened, forged steel gears, which are mounted on conical or double row roller bearings for maximum capacity. They run in an oil bath. The heavy-duty sealing of the lower gearcase is fitted with a metallic face seal, which provides the highest possible resistance to leaking and contamination in abrasive soil conditions.

Central Gearbox

On the bigger models, the central gearbox is cast iron and set back for reduced PTO angles. A friction slip clutch is standard for protection of the drivetrain. The EL 62 Duplex gearbox offers two speeds by inverting the gears. The Duplex gearbox with two speeds is standard on the EL 92. Two additional speeds are available as optional equipment, offering the adaptation capability to various working conditions.

Adjustable Rear Hood

TThe PTO cross and yoke and protective shear bolt are easily accessible. Access to grease the PTO cross is accomplished by loosening a few wing nuts and pulling the guard forward.

C-Blades

The special curved design of the Kuhn tiller “C” blades has been optimized, tested and provides chopping and mixing of plant residues, aggressive entry into hard soil while requiring less horsepower and increased crumbling of soil clouds. The EL series is fitted with six blades per flange as standard for efficient crumbling. For shallow work, L-blades can be fitted on the machine.

Depth Control

On all models, working depth is controlled by using skids or wheels. On the EL 82 and EL 92, rollers are available as an option. Crumbler rollers with a large diameter of 15” with removable bars or Packer rollers with a diameter of 19” are recommended for very wet conditions or clayey soils.

Specifications

Working width (m) 1.8
Working width (inches) 71"
Diameter of roller (inches) 21" / 525
Minimum power requirement for PTO (kW) 33
Minimum power requirement for PTO (hp) 45
Speed of rotor/s at 540 min-1 (min-1) 212
Maximum authorised tractor power (kW) 63
Maximum Authorised Tractor Power (hp) 85
Lateral drive mechanism Gearwheels
Type of tools C-blades or L-blades
Working depth (mini) (inches) 2" / 5
Working depth (max.) (inches) 9" / 23
Control of working depth Choice of skids or wheels
Weight with skids/wheels (lb) 1025 / 465