Seedbed Preparation 7326DH
Double tap to zoom
Offset C-shanks cushion the gangs and protect the unit. The offset design maximizes the clearance between the disc blades to help prevent plugging.
Standard scrapers are spring loaded; quickly make them rigid by tightening a bolt.
With a 5% faster turning speed than regular concavity blades, the exclusive SpeedBlade™ aggressively powers through heavy residue and thoroughly mixes soil at higher speeds without ridging. This self-sharpening serrated blade works like a regular notched blade, but its shallower blade cutout allows for shallower working depth. Unlike competitive blades, the low-concavity SpeedBlade stays sharper longer and maintains its shape as it wears. With more blade surface, the SpeedBlade wears better and last longer than blades with larger notches.
INCREASED TIRE AND HUB CAPACITY
All transport tires are radial tires and carry loads at 73 psi. Units also feature 8-bolt hubs on center and wings, with up to 8000-pound capacity for improved reliability.
IMPROVED GROUND CLEARANCE
Transport clearance of 13" allows for 24" or 26" diameter blade options, and a low-profile, t-style hitch tightens the turning radius in the field. Hydraulic gauge wheels, which actively raise and lower with main lift wheels, have also been added to the outside wings on larger units.
IMPROVED GANG BARS
Stronger 4" x 6" gang bars have polygon bushings and hardened pins for greaseless hinge points. Four bolt attachment plates and cradle gussets relieve stress on gang tubes.
HYDRAULIC GAUGE WHEELS
Eliminates the need to adjust gauge wheels when depth is changed. Eliminates gouging and wing hop. (29', 33', and 36' models only)
Heavy, Ductile Cast Spools
Our heavy, ductile cast spools each weigh 23.55 lbs., while welded spools used by competitors weigh only 11.01 lbs. each. Putting weight “in” the gang versus “over” the gang increases reliability in the C-shank and bearings. Nuts on each end of the disk gangs provide easy, quick maintenance.
Exclusive Maintenance-Free Bearings
Reduce maintenance time and extend life of bearings. These 360° self-aligning bearings are never sideloaded. A six-lip seal on each side locks in grease and prevents contamination. Additionally, the walking beam pivots utilize Teflon™-coated bushings, eliminating the need for tapered bearings and grease in pivot points.
Design ensures complete center cutout and eliminates the need for a middle breaker.
|NO. OF BLADES (9")||74|
|NO. OF BLADES (7.5")||86|
|TRANSPORT TIRES||340/60R16.5 (4)|
|WING TIRES||12.5Lx15 (4)|
|WEIGHT (approx lbs)||15,900|
|PTO H.P. REQ (min)||182+|
|HEIGHT (transport)||12' 10"|
|CENTER SECTION||9' 6"|
|1ST SECTION||7' 6"|