Double tap to zoom



Sorry, currently there are no features but check back with us later.


blades Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
 Drive Tires 26x12-12, 6ply Multi Trac®
 Cup Holder Standard
 Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
 Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
 Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
 Parking Brake Lever-actuated internal wet disc brake.
 Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
 Electrical 12-volt battery with 55-amp alternator.
 Power Components  
 Engine Brand Yanmar
 Engine Model 3TNV80FT
 Engine Displacement 1,267
 Engine Series TNV
 Engine Type Electronically Governed IDI Turbo Diesel
 Engine Speed 2,600 RPM
 Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
 Fuel Type Diesel
 Fuel Capacity 12-gallon (45.4-L), side fuel tanks
 Fuel Indicator Yes - mechanical float type
 Drive Hydro-Drive
 Drive Description Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler.
 Speed Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse.
 Carb Compliant Yes
 Deck Lift Hydraulic
 Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
 ROPS 2-post foldable ROPS standard with seat belt and latch.
 PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
 Drive Wheel Release Allows unit movement without engine running.
 Casters  50" thick caster yoke arms.
 Width / Cutting Deck 72"
 Deck Style Floating Deck
 Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
 Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
 Blade Tip Speed Approximately 17,900 fpm
 Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
 Blades 3 Blades at 24.50" Length
 Width 78.0 in. (198.1 cm)
 Length 100.6 in. (255.5 cm)
 Height 72.5 in. (244.6 cm)
Curb Weight 2041