Double tap to zoom

 

Features

Eco-Friendly

Reduces fuel consumption, fewer emissions and carbon footprint.

Fuel Savings

Delivers up to 25% in fuel savings.

Reduce Green House Gases

Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.

Easy to Start

Easy start in any altitude or climate condition (no manual choke).

Engine Efficiency

Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.

Sequential Fuel Injection

Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.

Specifications

Equipment  
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 20 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 20-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components  
Engine Brand Kohler®
Engine Model ECV730
Engine Type Electronic Fuel Injected
Engine Series Command™ EFI
Engine Speed 3,600 rpm
Engine Displacement 747
Air Filter Heavy-duty canister air filtration system
Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors.
Speed Infinitely variable speed selection 0-8.0 mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location.
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant No
Fuel Type Gas EFI
Decks  
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 18" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions  
Width 64.8 in. (164.6 cm)
Length 74 in. (188 cm)
Height 50 in. (127 cm)
Curb Weight 866