Double tap to zoom

 

Features

Eco-Friendly

Reduces fuel consumption, fewer emissions and carbon footprint.

Fuel Savings

Delivers up to 25% in fuel savings.

Reduce Green House Gases

Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.

Easy to Start

Easy start in any altitude or climate condition (no manual choke).

Engine Efficiency

Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.

Sequential Fuel Injection

Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.

Specifications

Equipment  
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components  
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0-11.5 mph (18.5 kmph) forward, 0-6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks  
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
Blades 3 Blades at 20.50" Length
Dimensions  
Width 72.8 in. (184.9 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)
Curb Weight 1247