Case 590 Super N

Productivity 

The 590 Super N focuses on productivity at every level, featuring ample power at both ends of the machine. The standard PowerLift™ feature increases operator productivity by delivering a lifting capacity of nearly 4,000 lbs – the highest in its class - and our exclusive over-center backhoe design helps reduce material spillage during roading. For even greater comfort, choose the Ride Control or speed selectable Auto-Ride Control (4WD ONLY) options. Operators can also customize their forward/reverse transitions with the industry-exclusive SmartClutch modulation. Side-mounted, high-intensity, flex lights provide superior jobsite visibility at night, and a new universal coupler option fits Cat® and John Deere attachments for expanded versatility. Plus, SiteWatch™ comes standard to help track, manage and optimize machine performance.

Fuel Efficiency 

CASE chose an SCR (Selective Catalytic Reduction) Tier 4 Final solution to meet emissions regulations without sacrificing strength. That’s because SCR is an after-treatment system. It lets the engine breathe easier and run at peak performance, which translates to maximum power. Plus, SCR is simple. No new filters. Just pour a little DEF (Diesel Exhaust Fluid) and go. Additional fuel efficiency options include auto-idle, auto-shutdown and ECO-mode, which provides full power to the backhoe while in neutral.

Comfort and Visibility 

Operators will be able to easily communicate to their spotter and enjoy superior cross-ventilation in a large cab with rear-quarter windows that open. Floor-to-ceiling glass provides excellent visibility to trenches and spoil piles. Making sure every operator is comfortable, CASE offers their traditional foot swing control, two-lever controls, or pilot controls for operating the backhoe. CASE pilot controls feature unlimited adjustments fore/aft, tilt in/out, and full surface adjustable wrist rests. The fully integrated loader control lever puts operation at the operator's fingertips for faster response times, and our Comfort Steer™ option cuts lock-to-lock steering wheel rotations in half to help reduce operator fatigue when loading, stockpiling and backfilling.

Serviceability 

Maximize uptime with simple and efficient daily maintenance. Swing-out coolers and ground-level hydraulic test ports are easily accessible while a flip-up hood, spin-on filters, grouped service points and serviceable axles without complete disassembly make routine upkeep easy. And with the SCR solution, there’s no filter to maintain or replace.

OPERATOR COMFORT

• ROPS/FOPS certified protective canopy
• Anti-vandalism cover for dash – w/ canopy only
• Rear fenders extensions
• Coat hook w/ garment strap
• Interior rearview mirror, convex 3.54 in (90 mm) wide x 10.83 in (275 mm) high
• Non-suspension seat – 180° swivel – Vinyl
• 2 in (50 mm) retractable seat belt
• Cup holder/storage tray mounted on left-hand fender
• Right-hand storage compartment w/ lid

ENGINE

• FPT F5BFL413A diesel
• Diesel Oxidation Catalyst with SCR
• Full flow engine oil filter
• Air cleaner – replaceable dry type with radial seal
• Aspirated air cleaner
• Fuel filter with water trap
• Radiator with de-aeration bottle
• Antifreeze to -34° F (-37° C)
• Electronic throttles – foot and rotary hand
• Self-adjusting belt
• High Pressure Common Rail computer controlled injection with diagnostic features

DRIVETRAIN

• Powershift S-Type transmission, 4F-3R fully synchronized electronic transmission controller and kick down in loader control lever – 2WD or 4WD
• Front axle: 4WD heavy-duty mechanically driven front axle with 14.0 x 17.5 tires, limited slip differential and drive shaft guard
• Rear axle: 4WD heavy-duty outboard planetary drive with 21.0 x 24.0 tires
• Torque converter – 12 in (305 mm)
• On-the-go electric 4WD control
• Electric F/R shuttle control
• Electric differential lock control, push-button
• Park brake, spring-applied, hydraulic release – SAHR

HYDRAULICS

• Ground level remote hydraulic test ports
• Pump 43 gpm @ 3,000 psi (162.6 L/min @ 207 bar)
• Heavy-duty oil cooler
• 7-micron, spin on oil filter

LOADER

• Bucket position indicator
• Lifting lugs on standard bucket
• Single-lever control w/ self-leveling and return-to-dig
• Hand operated clutch disconnects on loader and shift levers, single lever 4-function loader control: lift, dump, clutch cut-out, differential lock.

BACKHOE

• Over center design, Fabricated “S” boom
• Pro Control System
• Dipperstick integrated serrated gripper teeth
• Case mechanical coupler

OTHER

• Forward tilt engine hood
• Replaceable, molded front bumpers
• Front/Rear tie downs
• Reflective logos
• Lights – cab and canopy:
• 2 front driving
• 2 rear tail/stop
• 2 front flashers/turn
• 2 rear flashers/turn
• Lights – cab only: Adjustable halogen work lights – 55 W: 2 front, 2 side – left and right, 4 rear
• Lights – canopy only: Adjustable halogen work lights – 55 W: 2 side – left and right, 2 rear