McKeel Equipment, Kentucky
CASE IH
CASE CE
kubota
McKeel Equipment, Kentucky
Paducah
(270) 444-0110
1939 North 8th Street
Paducah, KY 42001
Call Us
Directions
Murray
(270) 753-3062
3724 US Highway 641 South
Murray, KY 42071
Call Us
Directions

Case IH TD103

New Products / Case IH / Mowers & Conditioners / Pull-Type Disc Mowers / TD103

Double tap to zoom

 

Features

  • Cutting Width

    10’ 4”

  • Cutting Height

    0.95” - 3.2”

  • Disc Speed

    2,835 RPM

  • PTO Required

    60 HP

Cutterbar

Superior Crop Flow

The Case IH TD103 pull-type disc mower features a modular cutterbar design for superior crop flow that reduces streaking and ensures quick mowing.

  • Versatility and Convenience

    • Quick change knives cut change time in half. Simply use the provided tool, no wrenches necessary.
    • Crop deflector shields located behind each end of the cutterbar to direct cut crop into a wide swath inside the tire path
    • Two end discs that co-rotate to provide a narrower swath
    • Able to adjust swath from 60 in–95 in (1.5 m–2.4 m)
    • Left cutterbar shield is hinged for easy service access

  • Unmatched Reliability

    • Shock protection to minimize repair expense
    • Discs protected from internal gear damage by the drive hub
    • 3-year cutterbar warranty includes one full-year of base factory warranty, plus two additional full years and unlimited hours of extended factory disc cutterbar warranty

80-degree Constant Velocity Joint

  • Overload protection is standard
  • Primary PTO uses an 80-degree constant velocity joint at the tractor end to permit tight turns, reduce noise and extend service life
  • Standard tractor tire bumpers protect PTO driveline and tractor tires


Adjustable From 2-10 Degrees

Tilt is adjustable from 2–10 degrees using a mechanical turnbuckle.

Easy Transport

Attaching and detaching the mower from the tractor is easily accomplished with a  simple clevis hitch . The TD103 can be pulled by lighter-weight tractors , as weight is pulled versus carried on a 3-point hitch.

  • Transport width is just 10 ft 10 in (3,300 mm) when end shields are folded
  • Removable parking jack stand is stored on top of tongue assembly
  • Hydraulic tongue swing cylinder powers the unit from transport to operating position
  • Has a 12-in (305-mm)-minimum cutterbar ground clearance in transport position
  • Hinged right-side cutterbar shield folds up for narrow transport
  • Safety tow chain standard
  • Low transport height eliminates the need for implement lights


Specifications

​​​​Quick Specs

 Cutting Width: 10 ft 4 in (3.16 m)
Number of Disks: 8
Number of Knives/Disk: 2
Input Speed: 540 rpm​

​